Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Biotech Diaphragm Valves

  • Overview
  • Ultra Compact Performance
  • Actuation Valves
  • Diaphragms
•  Available Sizes : 1/4", 3/8", 1/2", 3/4", 1", 1˝", 2", 2˝",3", 4",6" 
Body Material : 316L ASME BPE, Hastelloy,AL6XN
•  Diaphragm Material : EPDM, PTFE, Silicone, Ultraz®, Viton® Cert. FDA- USP Class VI
•  Operation : Standard Manual Bonnet,O-Ring Sealed Manual Bonnet,Pneumatic ,Submersible Bonnet Assembly
Surface Finish : SFV4,SFV5, SFV6, SFV1 ,SFV2 According to ASME BPE
Recent developments in tangential flow filtration systems, small-scale bioreactors, chromatography skids and lowflow sampling applications have brought about numerous requests for smaller valve sizes. As part of our ongoing commitment to provide the industry with application specific, state-of-the-art products, Aquasyn has introduced the Micro-Bio series valve. Roughly the size of an egg this valve is 40% smaller than our standard Biotech series valves. As with our Biotech series valves, the Micro-Bio utilizes a common sized body but offer the added advantage of miniature 1/8?, 3/16? and 1/4? nominal diameters. The Micro-Bio also shares the same inherent quality and features of our other valves, such as Tork-Tite? feet, integral sealing ridge on the body, a wide variety of materials of construction, surface finishes, end connections and other options.
Compact lightweight design
Choice of spring return or double acting operation
Selected limit switch options available
Banjo mount solenoid options available
NAMUR adaptor available
High cycle life
Integral controlled travel stop
EPDM
Fluoropolymer faced (TFM 1700)/EPDM
Silicone
Viton
Ultraz Fluoroelastomer
All diaphragms conform to USP Class VI specifications
Ultraz diaphragms conform to USP Class VI, ASMEBPE and meet the extractable requirements of CFR 21 177.2600

Tank Outlet Valves

  • Overview
  • Performance
  • Actuation Valves
  • Diaphragms
•  Available Sizes : 1/4", 3/8", 1/2", 3/4", 1", 1˝", 2", 2˝",3", 4",6" 
Body Material : 316L ASME BPE, Hastelloy,AL6XN
•  Diaphragm Material : EPDM, PTFE, Silicone, Ultraz®, Viton® Cert. FDA- USP Class VI
•  Operation : Standard Manual Bonnet,O-Ring Sealed Manual Bonnet,Pneumatic ,Submersible Bonnet Assembly
Surface Finish : SFV4,SFV5, SFV6, SFV1 ,SFV2 According to ASME BPE
The Aquasyn tank bottom valve is a reliable solution for your tank outlet needs, with its conical profile allows for complete drainability and the prevention of deadlegs or entrapment areas. These tank valves are installed by either welding, clamping or bolting to the tank surface. Tank bottom valves are available in sizes ranging from 1/4? through 4?, are manufactured using a variety of materials including our standard type 316L stainless steel. They are also available with a wide variety of drain ports and end connections to suit the process needs. Opening and closing of the valve can be achieved by means of manual or pneumatic actuation
Compact lightweight design
Choice of spring return or double acting operation
Selected limit switch options available
Banjo mount solenoid options available
NAMUR adaptor available
High cycle life
Integral controlled travel stop
EPDM
Fluoropolymer faced (TFM 1700)/EPDM
Silicone
Viton
Ultraz Fluoroelastomer
All diaphragms conform to USP Class VI specifications
Ultraz diaphragms conform to USP Class VI, ASMEBPE and meet the extractable requirements of CFR 21 177.2600

Point of Use Diaphragm Valves

  • Overview
  • Description
  • Key Features
  • Diaphragms
•  Available Sizes : 1/4", 3/8", 1/2", 3/4", 1", 1˝", 2", 2˝",3", 4",6" 
Body Material : 316L ASME BPE, Hastelloy,AL6XN
•  Diaphragm Material : EPDM, PTFE, Silicone, Ultraz®, Viton® Cert. FDA- USP Class VI
•  Operation : Standard Manual Bonnet,O-Ring Sealed Manual Bonnet,Pneumatic ,Submersible Bonnet Assembly
Surface Finish : SFV4,SFV5, SFV6, SFV1 ,SFV2 According to ASME BPE
State of the art block body design, coupled with the tighest bend radii in the industry allow Aquasyn point of use valves to be easily integrated into areas where space is at a premium. Our design provides minimal pressure drop and superior system performance. We can deliver customized and standard point of use valves on a fast track basis.
Minimized footprint
Compact centerline dimensions
Readily cleanable exterior, all surfaces sloped and radiused
True Zero Static design
Low pressure drop, high flow co-efficient (Cv) insures optimum performance
Integrated sampling valves and other custom options available
92° angle bends to facilitate drainability
EPDM
Fluoropolymer faced (TFM 1700)/EPDM
Silicone
Viton
Ultraz Fluoroelastomer
All diaphragms conform to USP Class VI specifications
Ultraz diaphragms conform to USP Class VI, ASMEBPE and meet the extractable requirements of CFR 21 177.2600

Static Tee Valves

  • Overview
  • Description
  • Key Features
  • Diaphragms
•  Available Sizes : 1/4", 3/8", 1/2", 3/4", 1", 1˝", 2", 2˝",3", 4",6" 
Body Material : 316L ASME BPE, Hastelloy,AL6XN
•  Diaphragm Material : EPDM, PTFE, Silicone, Ultraz®, Viton® Cert. FDA- USP Class VI
•  Operation : Standard Manual Bonnet,O-Ring Sealed Manual Bonnet,Pneumatic ,Submersible Bonnet Assembly
Surface Finish : SFV4,SFV5, SFV6, SFV1 ,SFV2 According to ASME BPE
Aquasyn Zero Static block body tee valves are the premiere product of their kind in the industry. Our true Zero Static design offers the smallest footprint to facilitate installation within complicated piping geometries and is the lightest weight of any similar style body. And they can be customized into a variety of configurations, including sampling or diverting flow.
True Zero Static design
Fully machined from block
Ergonomic design
Completely drainable
Readily cleanable exterior, all surfaces sloped and radiused
Integrated sampling valves and other custom options available
EPDM
Fluoropolymer faced (TFM 1700)/EPDM
Silicone
Viton
Ultraz Fluoroelastomer
All diaphragms conform to USP Class VI specifications
Ultraz diaphragms conform to USP Class VI, ASMEBPE and meet the extractable requirements of CFR 21 177.2600

Fusion Valves

  • Overview
  • Hose Specification
  • Key Features
  • Diaphragms
•  Available Sizes : 1/4", 3/8", 1/2", 3/4", 1", 1˝", 2", 2˝",3", 4",6" 
Body Material : 316L ASME BPE, Hastelloy,AL6XN
•  Diaphragm Material : EPDM, PTFE, Silicone, Ultraz®, Viton® Cert. FDA- USP Class VI
•  Operation : Standard Manual Bonnet,O-Ring Sealed Manual Bonnet,Pneumatic ,Submersible Bonnet Assembly
Surface Finish : SFV4,SFV5, SFV6, SFV1 ,SFV2 According to ASME BPE
Low volatile grade, platinum-cured silicone hose for critical pharmaceutical, biomedical, cosmetic, and food applications comprises the liner of APSW. The liner is then slipped onto a mandrel and wrapped with polyester mesh fabric, 316 stainless steel reinforcing wire, and additional silicone. It is cured into a homogeneous hose to enhance its pressure and vacuum capabilities. APSW has undergone extensive physical, chemical, and biological testing . APSW is not intended for implantation and is not to be used for continuous steam applications.
Rated for full vacuum
Crush and kink resistant
Durable and heavy-duty yet translucent for visual flow contact
Sterilizable by autoclave, CIP, SIP, and gamma radiation processes
Resists temperature extremes, compression set, chemical attack, ozone, radiation, moisture, and environmental exposure
•  Available Sizes : 1/4" -5/16" -3/8" -1/2" -5/8" 3/4" -1" 
Tube : P.T.F.E ( Polyetetrafluroethylene)
•  Temperature : -75°C to 230°C
•  Reinforcement : stainless steel braid &stainless steel wire coated by a white silicone.
•  Certifications : FDA 21CFR - 177 2600, USP ,Hemolysis, Cytotoxicity
Logo FDA iso flag

 

 

 

 

USP's official Reference Standards are highly characterized specimens of drug substances, excipients, impurities, degradation products, dietary supplements, compendial reagents, and performance calibrators. They are specified for use in conducting official USP–NF tests and assays.
USP also provides Reference Standards specified in the Food Chemicals Codex as well as authentic substances—high-quality —as a service to analytical, clinical, pharmaceutical, and research laboratories.
USP's Reference Standards are used in more than 130 countries around the world.
+