Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

45° Elbows

•  Available Sizes : 0,50" -0,75" -1,00" -1,50" -2,00" -2,50" -3,00" -4,00"-6,00" .
I.D Polishing : 0.8mmRa or Better, 0,5mm Ra or Better
•  O.D Polishing : 0.8mm Ra or Better
•  Material : AINSI 316 L - AINSI 304 L
•  Certifications : 3-A

45° Elbows with Tangents

•  Available Sizes : 0,50" -0,75" -1,00" -1,50" -2,00" -2,50" -3,00" -4,00"-6,00" .
I.D Polishing : 0.8mmRa or Better, 0,5mm Ra or Better
•  O.D Polishing : 0.8mm Ra or Better
•  Material : AINSI 316 L - AINSI 304 L
•  Certifications : 3-A

45° Elbows with Ferrules

•  Available Sizes : 0,50" -0,75" -1,00" -1,50" -2,00" -2,50" -3,00" -4,00"-6,00" .
I.D Polishing : 0.8mmRa or Better, 0,5mm Ra or Better
•  O.D Polishing : 0.8mm Ra or Better
•  Material : AINSI 316 L - AINSI 304 L
•  Certifications : 3-A

180° Elbows

•  Available Sizes : 0,50" -0,75" -1,00" -1,50" -2,00" -2,50" -3,00" -4,00"-6,00" .
I.D Polishing : 0.8mmRa or Better, 0,5mm Ra or Better
•  O.D Polishing : 0.8mm Ra or Better
•  Material : AINSI 316 L - AINSI 304 L
•  Certifications : 3-A
3a semi elbow 3a sanitary half elbow Mirror Polishing elbow for ordital welding sanitary u elbowLogo FDA iso flag

 

 

 

ANOMALY OR INIDICATION
•  Cluster of pits . None accepted
•  Grit lines If Ra is met.
•  Nicks None accepted.
•  Oxides None accepted.
•  Pits If dia. < 0.020" and bottom is shiny.
•  Star burst . None accepted.
•  Scratches If lenght < 0.25", depth < 0.003" and Ra is met.
•  Surface craks None accepted.
•  Surface residuals None accepted.